(a) Connect the circuit as shown in Figure 2

(b) Ask the supervisor to check the circuit connection.

(c) Copy Table 2 into your answer booklet.

R(Ω)	10 k Ω	1 k Ω	100 Ω
V2(V)

(d) Switch on the supply voltage.

(e) Measure and record the value of V2 in Table 2.       

(f) Switch off the supply voltage and replace the 10 kΩresistor.
with the 1 kΩ resistor

 (g) Repeat steps (d) and (e)

(h)Switch off the supply voltage and replace the 1 k Ω resistor with the 100 Ω resistor

 (i) Repeat steps (d) and (e)

  (j)Switch off the supply voltage

 (k)Briefly describe the effect of the values of the resistance on the output voltage (V2) of the circuit.